Shredders, Granulators & Ancillary Equipment For Sale

Below you will find details of both new & used equipment currently available either at our workshop in Stalybridge, or direct from our customers sites.

To display your own equipment for sale on this page please contact us with details.

Available Machinery & Recently Sold

Centriblast Disintegrator Shredder

Automatic Baling Company (UK) — Centriblast Disintegrator

Auto-feed shredder/disintegrator unit designed for reducing sheet cardboard etc. into an animal bedding product. Strong, well built machine in visibly good condition. Run and tested on our customers site. Open to offers as surplus to requirements.

Condition: Used

Stock Reference: 1040U


Ulster U100 Twin Shaft (Dual) Shredder

Ulster Shredders (Ireland) — U100 Twin Shaft Shredder

Twin 37kW Electric Drives, Long Bed Model fitted with a classifier screen designed especially for secondary tyre processing. Separates steel from pre-shredded tyre rubber. Originally fed by a U45 (see Stock Ref: 1036N). 2010 Model – little use since new.

Condition: Very Good — Used

Stock Reference: 1034R


S4R (Vecoplan) SR2500 Single Shaft Shredder

Systems 4 Recycling (S4R) — SR2500 Single Shaft Shredder (Manufactured by Vecoplan GmbH)

Single Shaft Shredder ideal for RDF/SRF, plastics, wood etc. 2009 Model with little use from new. 247kW variable speed Eco-drive with pneumatic counter knife protection. 60mm rotor blades and 30mm screens fitted. New blades prior to sale.

Condition: Good – Used

Stock Reference: 1033U


Lindner Power Komet 2200

Lindner Recyclingtech GmbH (Austria) — Power Komet 2200 Single Shaft Shredder

Single Shaft Shredder ideal for RDF/SRF applications. 2009 Model with little use from new. Twin 132kW variable speed drive motors with energy saving belt drives and protection clutches. 35mm screens currently fitted. New blades prior to sale.

Condition: Good – Used

Stock Reference: 1032U


GXS4080 Single Shaft Shredder

AWC Engineering — GXS4080 Single Shaft Shredder

37kW Single Shaft Shredder, 40mm screen fitted — others available. Ideal for plastics, paper, wood, copper cable etc.
New machine with 12 months warranty. Delivered and installed by our engineers.

Condition: New

Stock Reference: 1029N


7.5kW Twin Shaft Shredder

Twin Shaft Shredder — Manufacturer TBC

7.5kW ABB Drive motor, Rossi Gearbox, 15mm three hook blades in good condition. Reconditioned by ourselves 12 months ago and has done little work since. Serviced and tested prior sale.

Condition: Good — Used

Stock Reference: 1024U


GXS2260 Single Shaft Shredder

AWC Engineering — GXS2260 Single Shaft Shredder

18.5kW Single Shaft Shredder, 30mm screen fitted — others available. Ideal for plastics, paper, wood, copper cable etc.
New machine with 12 months warranty. Delivered and installed by our engineers.

Condition: New

Stock Reference: 1014N


Franssons FRP152-40-4 Single Shaft Shredder

Franssons Recycling Machines (Sweden) — FRP152-40-4 Single Shaft Shredder

Reconditioned 55kW ABB Electric Drive, 20mm screens currently fitted. Good for plastics, paper, wood etc. Checked and tested by our engineers. Available for sale or possible hire.

Condition: Good — Used

Stock Reference: 1011U


For pricing and more information regarding any of the above shredding equipment please contact us
Herbold Meckesheim SML3080 Granulator

Herbold Meckesheim GmbH (Germany) — SML3080 S3-2 Granulator

15kW Drive Motor, 3/2 configuration, Air Swept Loading Hopper. 8mm screens fitted — others available if required. Ideal for light plastics. Previously used on plastic film.

Condition: Used

Stock Reference: 1042U


GXC2660

AWC Engineering — GXC2660 Granulator

15kW Drive Motor, 3/2 configuration V-cut rotor. 8mm screens fitted — others available. Ideal for plastics etc. New machine with warranty. Delivered and installed by our engineers. Air conveying & bagging equipment available if required.

Condition: New

Stock Reference: 1037N


GXC3280 Granulator

AWC Engineering — GXC3280 Granulator

30kW Drive Motor, C-rotor heavy duty staggered rotor blade configuration. 10mm screens fitted — others available. Ideal for plastics, copper cable etc. New machine with warranty. Delivered and installed by our engineers. Air conveying & bagging equipment available if required.

Condition: New

Stock Reference: 1036N


GXC3280 Granulator

AWC Engineering — GXC3280-E Granulator

22kW Drive Motor, 3/2 configuration V-cut rotor. 12mm screens fitted — others available. Ideal for plastics etc. New machine with warranty. Delivered and installed by our engineers. Air conveying & bagging equipment available if required.

Condition: New

Stock Reference: 1030N


Rapid GK205 Granulator

Rapid AB Maskin (Sweden) — GK205 Granulator

Small 5.5kW Granulator ideal for light plastics. Good blades and bearings. Fitted with sound enclosure.
Tested, serviced and warranty available. Good for light plastics.

Condition: Good — Used

Stock Reference: 1026U


Blackfriars 27

Blackfriars (UK) — 27″ASHD Granulator

30kW Drive, blades will be resharpened or replaced as required before delivery. This is a heavy duty machine, ideal for plastics, copper cable etc. Additional side chute for feeding profiles. Will be checked, tested and light refurbishment before sale.

Condition: Good — Used

Stock Reference: 1017U


GXC52160 Granulator

AWC Engineering — GXC52160 Granulator

110kW Drive motor, sound enclosure, 5/2 configuration V-cut rotor. 12mm screens fitted — others available. Ideal for voluminous plastics, profiles and sheets. New machine with warranty. Delivered and installed by our engineers. Infeed belt, air conveying and fines separation equipment available if required.

Condition: New

Stock Reference: 1016N


Previero MU Granulator

Previero Spa. (Italy) — MU Granulator

110HP Drive motor. Will have new blades, belts, fixings and screen. This is a very heavy duty, high inertia machine. Ideal for plastics etc. Will be refurbished and tested by our engineers prioir to sale.

Condition: Ex-Site — Will be refurbished prior to sale

Stock Reference: 1010R


Blackfriars 27

Blackfriars (UK) — 27″ASHD Granulator

37kW Drive, new blades, hopper, outlet chute and electrical refit. This is a heavy duty machine, ideal for plastics, copper cable etc. Refurbished and tested by our engineers.

Condition: Average

Stock Reference: 1009R


For pricing and more information regarding any of the above granulation equipment please contact us
PEL 700 Vertical Baler

PEL Waste Reduction Equipment (Ireland) — 700 Vertical Baler

Compact, well built vertical baler ideal for cardboard, paper, plastic film etc. As new condition, never used. Can be seen running and tested prior sale.
Produces 85cm x 71cm x 51cm bales.

Condition: As new

Stock Reference: 1044N


Avermann AVOS1410 Horizontal Auto Tie Baler

Avermann Maschinenfabrik GmbH (Germany) — AVOS1410 Horizontal Baler with Auto Tie

Top quality, high capacity baler ideal for cardboard, paper, plastic film etc. This is a heavy duty machine in excellent condition. Now surplus to requirements so open to sensible offers. Expensive machine when new. Can be seen running and tested prior sale.

Condition: Used

Stock Reference: 1043U


Hydraulic Bin Lifter

Avermann Maschinenfabrik GmbH (Germany) — Bin Tipper

Heavy duty 1100mm automatic bin tipper including frame mounted hydraulic power pack. Was previously used for loading cardboard into a horizontal baler. Now surplus to requirements so open to sensible offers.

Condition: Used

Stock Reference: 1041U


For pricing and more information regarding any of the above equipment please contact us

Power Komet 2800

SOLD Lindner Recyclingtech GmbH (Austria) — Power Komet 2800 Single Shaft Shredder

Single Shaft Shredder ideal for RDF/SRF applications. March 2012 Model with less than 12 months use. Twin 160kW motors with variable speed ABB drives and protective clutches. 30mm screens currently fitted. Various spares, conveyors and enclosed loading hopper available if required. Viewing welcomed by prior arrangement.

Condition: Excellent – Used

Stock Reference: SOLD1044U


Ulster U100TS-Mk1 Shredder

SOLD Ulster Shredders (Ireland) — U100TS-Mk1 Twin Shaft Shredder

Twin 37kW Electric Drives, new support frame, hopper, shafts, blades, spacers, cleaning fingers, bearings, shaft tightening mechanisms, and control panel. Fully stripped, refurbished and tested. Available for viewing and trials in Stalybridge.

Condition: Very Good — Refurbished

Stock Reference: SOLD1004R


Magnapower OCP2310 Overband Magnet

SOLD Magnapower (UK) — OCP2310 Overband Magnet

1.5kW Drive motor through speed reducer with optional stainless steel belt guards. Manufactured in 2007 and has seen little use. Belt is in good condition. Cleaned, serviced and tested prior to sale.

Condition: Very Good

Stock Reference: SOLD1022U


Untha RS30-4-S Four Shaft (Quad) Shredder

SOLD Untha (Austria) — RS30-4-S Four Shaft Shredder

Twin 7.5kW Drive motors, blades are as new. Previously used on cardboard and has run very few hours. New panel & hopper. Ideal for plastics, wood, cardboard, copper cable etc. Tested before sale and supplied with 12 months warranty.

Condition: Excellent

Stock Reference: SOLD1018R


GXS2260 Single Shaft Shredder

SOLD AWC Engineering — GXS2260 Single Shaft Shredder

18.5kW Single Shaft Shredder, 40mm screen fitted — others available. Ideal for plastics, paper, wood, copper cable etc.
New machine with 12 months warranty. Delivered and installed by our engineers.

Condition: New

Stock Reference: SOLD1013N


AWC Refurbished 80200 Granulator

SOLD AWC Engineering — Model 80200 Granulator

200kW drive motor with hydraulic chamber and screen access. Fully stripped, inspected and rebuilt to include new 5 row staggered rotor, blades, overhauled electrics, 20 & 50mm screens supplied.

Condition: Refurbished

Stock Reference: SOLD1039R


GXS40120 Shredding System

SOLD AWC Engineering — GXS40120 Single Shaft Shredder c/w Conveyor & Metal Detector

55kW drive motor with optional wear resistant shaft, fluid coupling, outfeed conveyor and Mesurtronic metal detector. 40mm screen fitted — others available. Ideal for plastics etc. New machine with 12 months warranty.

Condition: New

Stock Reference: SOLD1038N


Ulster U45 Twin Shaft (Dual) Shredder

SOLD Ulster Shredders (Ireland) — U45SB Twin Shaft Shredder

Twin 15kW Electric Drives, Short Bed Model with additional seal protectors designed for pre-shredding car tyres.
2010 Model – little use since new.

Condition: Very Good — Used

Stock Reference: SOLD1035R


IMG_1128

SOLD Blackfriars (UK) — 26″LVD Granulator

30kW Drive motor, resharpened blades, 8mm screen. Includes baseplate, support stands, hopper, motor starter etc.
Ideal for plastics etc. Chamber refurbished with new bearings. Will be fully refurbished and tested prior to sale.

Condition: Good

Stock Reference: SOLD1021R


GXT2140S Twin Shaft Shredder

SOLD AWC Engineering — GXT2140 Twin Shaft Shredder

7.5kW drive motor, 15mm blades double stacked for a 30mm cut. Ideal for plastics, paper, wood, copper cable etc. New machine with 12 months warranty. Delivered and installed by our engineers.

Condition: New

Stock Reference: SOLD1031N


Ulster Engineering U45 Twin Shaft Shredder

SOLD Ulster Shredders (Ireland) — U45 Twin Shaft Shredder

Twin 15kW Electric Drive, 22mm twin hook blades ideal for paper, cardboard, copper cable, wood, plastics etc. Fully reconditioned and supplied with warranty.

Condition: Very Good — Refurbished

Stock Reference: SOLD1028R


Rapid 3023

SOLD Rapid AB Maskin (Sweden) — GK3023 Granulator

Small 7.5kW Granulator ideal for light plastics. Good blades and bearings. Fitted with sound enclosure.
Includes blower, cyclone and frame. Tested, serviced and warranty available. Good for light plastics.

Condition: Average — Used

Stock Reference: SOLD1027U


Weima TS300/1200

SOLD Weima Machinenbau GmbH (Germany) — TS300/1200 Granulator

55kW Granulator with Force Feeder, 15mm screen fitted. Rebuilt with new blades and bearings.
Tested and supplied with 12 month warranty. Good for plastics.

Condition: Very Good — Refurbished

Stock Reference: SOLD1025R


Dragon D80 Single Shaft Shredder

SOLD Dragon Machinery (Wales) — D80 Single Shaft Shredder

30kW Single Shaft Shredder, 30mm screen fitted. Fully rebuilt with new rotor shaft, bearings and blades.
Tested and supplied with 12 month warranty. Good for plastics.

Condition: Very Good — Refurbished

Stock Reference: SOLD1023R


IMG_0208

SOLD AWC Engineering — GXS2250 Single Shaft Shredder

15kW Single Shaft Shredder, 15 & 40mm screens supplied — others available. Ideal for plastics, paper, wood, copper cable etc.
New machine with 12 months warranty. Delivered and installed by our engineers.

Condition: New

Stock Reference: SOLD1020N


Blackfriars 12ASHD Granulator

SOLD Blackfriars (UK) — 12″ASHD Granulator

15kW Drive motor, new blades, screen and electrical refit. This is a strong little machine, ideal for plastics, copper cable etc.
Refurbished and tested in our works.

Condition: Very Good — Refurbished

Stock Reference: SOLD1019R


SEM-Nelmor 10x12 Granulator

SOLD SEM Security Engineered Machinery / Nelmor (USA) — 10×12 Granulator

7.5kW Drive motor, blades resharpened, new screen and belts. Small machine ideal for plastics etc.
Light refurbishment and tested at our works.

Condition: Good — Refurbished

Stock Reference: SOLD1012R


USI Cumberland Model 20 Granulator

SOLD USI / Cumberland (USA) — Model 20 Granulator

30kW Drive motor, new support frame, hopper, blades and fixings, 8mm screen fitted. Ideal for plastics, rubber ect.
Refurbished and tested by our engineers.

Condition: Good — Refurbished

Stock Reference: SOLD1008R


MTB BAT1200 Granulator

SOLD MTB Recycling (France) — BAT1200 Granulator

Reconditioned drive motor, new bearings, hydraulics, blades, blade fixings, screen. Ideal for copper cable, rubber ect.
Fully refurbished including bare metal rebuild.

Condition: Very Good — Refurbished

Stock Reference: SOLD1007R


Meltog S/H1 Shredder

SOLD Meltog (UK) — S/H1 Twin Shaft Shredder

7.5kW Electric Drive, 15mm twin hook blades ideal for paper, cardboard, copper cable, wood, light plastics etc. As new condition having only run for 5 hrs

Condition: Little Used (5hrs) — As New

Stock Reference: SOLD1006R


Ulster U7 Shredder

SOLD Ulster Engineering (Ireland) — U7 Twin Shaft Shredder

7.5kW Electric Drive, new Siemens motor fitted, blades, spacers, bearings, gears (worm & wheel), hopper. Good for paper, cardboard, light plastics etc. Refurbished and tested at our works.

Condition: Very Good — Refurbished

Stock Reference: SOLD1005R


Blackfriars 15/26

SOLD Blackfirars (UK) — 15/26 Multi-Knife Granulator

37kW Brook Crompton Drive motor. New baseplate, panel, blades and fixings, 10mm Screen. Refurbished and tested by our engineers.

Condition: Very Good — Refurbished

Stock Reference: SOLD1003R


Blackfriars 3215-1

SOLD Blackfriars (UK) — 32/15 Granulator

7.5kW Drive motor, sound enclosure and complete with integrated product conveying system. 8mm Screen, resharpened knives and spare set supplied. Checked and tested by our engineers.

Condition: Excellent — As New

Stock Reference: SOLD1002R


Sant Andrea G40

SOLD Sant Andrea Novara Spa. (Italy) — G40/1000 Twin Shaft Shredder

30kW hydraulic drive motor. 50mm wide, single hook blades in very good condition. Ideal for plastics, wood, car tyres, copper cable etc.

Condition: Good — Refurbished (Brand New Power Pack)

Stock Reference: SOLD1001R


If your are looking for equipment similar to those listed above, or have machinery available for sale please contact us with details.

Shredders & Granulators Wanted

We are constanly looking to add good quality equipment to our inventory and/or purchase machinery for refurbishment in our workshop.
If you have redundant equipment available that you are looking to dispose of, or are looking part-ex and upgrade your existing system please contact us.

Stock Reference: WANTED 26/4/2013


Blackfriars Granulators Wanted

Blackfriars Granulators bought for stock, anything considered “Dead or Alive”.
Servicing, spares and repairs available. We are the Blackfriars Granulator specialists!
Please contact us for more info.

Stock Reference: WANTED 17/3/2013


SSI & Shred-Tech Shredders Wanted

Shredders bought for refurbishment in our workshop.
Servicing, spares and repair of your exisiting machinery available.
Please contact us for more info.

Stock Reference: WANTED 5/1/2013